Winco TMT-FT1 Frothing Thermometer 5 Inch Probe NSF Certified Stainless Steel

• 1 diameter dial face
• 5 probe
• Includes pot clip
• Wide temperature range 0 to 220F; -18 to 104C
• Recalibrates for accuracy

1. Fill cup with ice and top off with cold water and stir for 30 seconds.
2. Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed.
3. Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).

Winco TMT-FT1 Frothing Thermometer, 1" Dial, 5" Probe

• 1 diameter dial face • 5 probe • Includes pot clip • Wide temperature range 0 to 220F; -18 to 104C • Recalibrates for accuracy Calibration Instructions:Calibration on this unit should done with a cold bath at 32F(0C) for a more accurate calibration.

• Fill cup with ice and top off with cold water and stir for 30 seconds. • Insert probe into cup at least 1" deep for 15 seconds or until the temperature reading stabilizes. Keep the probe from touching the sides or bottom of the glass.NOTE: If the thermometer settles at 32F(0C), there is no calibration needed. • Use pliers and adjust the calibration nut on the bottom of the dial and turn until it reads the proper temperature, 32F(0C).

The Winco TMT-FT1 Frothing Thermometer, 1" Dial, 5" Probe is built for commercial foodservice professionals who demand durability, performance, and ease of use. Whether you're outfitting a restaurant, hotel kitchen, bakery, or catering setup, this product is a practical and reliable choice for daily operations.

• Commercial-grade construction: Ideal for high-volume environments like restaurants, cafes, and institutional kitchens.
• Professional utility: Supports consistent service and safe handling during busy shifts.
• Trusted by the industry: A go-to choice for chefs, line cooks, kitchen managers, and hospitality teams nationwide.