Oxygen Stone - 0.5 Micron (Flare Threads)

Quick Info

• New! Easier to Sanitize Design 
• We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect and disconnect your tubing.
• This allows you to place the stone by itself directly in a pot of boiling water to sanitize. Easy. 
• 316 Stainless
• 1/2" diameter
• Stone is 1" in length
• Overall length is 1 7/8"

Product Overview

New! Easier to Sanitize Design 
This innovative design was the result of customer feedback about the difficulty of santizing our traditional barbed stone when tubing was attached. We added threads instead of a barb and now you can use the fittings you see at the bottom of this page to connect and disconnect your tubing. This allows you to place the stone by itself directly in a pot of boiling water to sanitize. Easy.

316 Stainless
1/2" diameter. Stone is 1" in length. Overall length is 1 7/8"

To Sanitize
To properly sanitize your stones, we recommend you run it in a sanitized solution for 5 minutes. If the stone becomes clogged we recommend boiling the carb stone for 1-3 minutes to help break down anything within it.

Important Notes
You do not want to touch the stainless stone portion with your hands. The oils on your fingers can actually clog the small pores in the stone.

The stone does not come with the barb fitting or flare nut - those will have to be purchased on their own. See the Related Items below.

The .5 Micron stone is more commonly used for carbonation. However it can be used pre-fermentation with an O2 tank and regulator for oxygenation. Not the ideal choice if you want to aerate with an oxygen pump (aquarium pump) - use KEG590 for aeration. And if you are looking for a neat, all-in-on complete system for carbonation check out our Carbonating Keg Lid.