Hood Thermowell For Threaded Neck Carboys - 15 in.

Quick Info

• Carboy hoods are exceptionally useful for blowoff tubes. 
• Just add 3' of 1/2" racking tubing into a bucket of water as your airlock.
• Inner Diameter of Thermowell is slightly larger than 1/4"
• Note: The color of the hood you recieve may vary from the hood that is pictured.

Product Overview

This carboy thermowell is used in conjunction with the Digital Controller, FE601, FE601A, FE602, or FE611 to more accurately regulate internal temperature during fermentation. It is exceptionally useful during the start of fermentation when the lag between ambient temperature in the refrigerator and actual temperature in the carboy can vary greatly. Now you can keep your beer or wine within one degree of the set point on your digital controller. Designed to fit glass 6.5 gallon threaded neck carboys, the unit comes with a 15" stainless steel thermowell and a carboy hood that will accommodate a standard airlock or 1/2 inch blow off tubing.

Will not work with the Analog Johnson Temperature Controller (FE600) because the probe is too large. This unit has been redesigned to work with 2016 Ranco Probes.

TIP: Carboy hoods are exceptionally useful for blowoff tubes. Just add 3' of 1/2" racking tubing into a bucket of water as your airlock.

Inner Diameter of Thermowell is slightly larger than 1/4"

Note: The color of the hood you recieve may vary from the hood that is pictured.