Stero 3/4 in. 120V Hot Water Solenoid Valve for Hobart (UTW28, UW50) - 0P-542815
Stero 3/4 in. 120V Hot Water Solenoid Valve for Hobart (UTW28, UW50) - 0P-542815
- Listed fitment: 6 models across 1 brand
- Height (in.): 3
- Length (in.): 5
- Width (in.): 4
- Genuine Stero part 0P-542815
All compatible models
6 modelsVerify your unit's model number on the data plate matches one below before ordering.
Request a quote
Need a custom build, freight order, or just want pricing in writing before you order? Quotes back within 24 hours.
Stero 0P-542815 is a 3/4" 120V Hot Water Solenoid Valve. It opens and closes the flow circuit on an electrical signal. Replacement is usually called for when you are seeing no flow when energised, flow that continues after shut-off, or an audible buzz without actuation.
Listed fitment covers 6 models across 1 brand, including Hobart C44A, C44AW, C54A. It also cross-references 21 manufacturer part numbers. Check the number on the part you are replacing, or your unit's model number, against the lists below before ordering. The specifications below are the published figures for this exact part number.
Supplied as a single replacement unit.
Asco 3/4" Hot Water Solenoid Valve, 120V, N/c, 125 PSI, 210 Degree F, Red Hat Ii ( All Red Hat Ii Are Piston Type) Use Repair Kit Champion Dishwasher Energy Mizer Dishwasher Hobart Dishwasher Series Am Insinger Dishwasher Stero Dishwasher SC-1 Thru SC-9, SC-20-(1,2), C-25-(1,2,3), Sct, SD2RA, Sdra, Sdra-pkg, Stbuw, Stpc, Stpcw, Systematic, Utensil.
Specifications
| Height (in) | 3 |
| Length (in) | 5 |
| Width (in) | 4 |
Listed fitment
- Hobart: C44A, C44AW, C54A, UTW28, UTW28C, UW50
Cross-reference
- Champion: 104730
- Hobart: 00-106468-00005, 00-108156-00001, 00-270329-00001, 00-89445-1, 106468-5, 108156-1, 270329-1, 89445-1
- Insinger: D2397 (120V)
- Star: STR2X3, STR2XB
- Sterling: 2X3, 2XB
- Stero: 0P-542815, P54-2815, P542815, SO2X3, SO2XB, SOP54-2815, SOP542815
Ordering by part number is the most reliable way to get the right part. If you are matching an existing component, compare the values in the table rather than the description.