MRCOOL Signature Series 95% AFUE 70,000 BTU 4 Ton Downflow Single-Stage Multi-Speed ECM Motor Low NOx Gas Furnace with 17.5" Cabinet MGD95SE070B4XA
MRCOOL Signature Series 95% AFUE 70,000 BTU 4 Ton Downflow Single-Stage Multi-Speed ECM Motor Low NOx Gas Furnace with 17.5" Cabinet MGD95SE070B4XA
- 66,000 BTU/h input, 95% AFUE
- Voltage: 120V, 1-phase, 60 Hz
- AHRI Certified, CSA Certified
- Manufacturer part number MGD95SE070B4XA
Request a quote
Need a custom build, freight order, or just want pricing in writing before you order? Quotes back within 24 hours.
Overview
The MRCOOL MGD95SE070B4XA is a gas furnace from the MRCOOL Signature Downflow 95% AFUE Furnace line. It is rated at 66,000 BTU/h input and 64,000 BTU/h output. MRCOOL rates its efficiency at 95% AFUE. It runs on 120V single-phase power.
A gas furnace heats the home through its ductwork and can pair with an add-on evaporator coil and outdoor condenser for cooling.
Highlights
- Self-diagnostic system helps pinpoint faults for faster service
- Multi-position installation
- Converts to propane with an optional LP kit
- Multi-speed high efficiency (constant torque) blower motor
- Self diagnostics saves last 10 fault codes regardless of power interruption
- Standardized widths for easy coil fit
- Aluminized steel inshot burners for smooth ignition
- Complies with California's South Coast Air Quality
- Easily removable slide out blower design
- Constant torque motor produces consistent airflow and even temperatures
Specifications
| Model | MGD95SE070B4XA |
| Series | Signature Downflow 95% AFUE Furnace |
| Heating Capacity (BTU/h) | 66,000 |
| Nominal Tonnage | 4 |
| Input (BTU/h) | 66,000 |
| Output (BTU/h) | 64,000 |
| AFUE (%) | 95 |
| Stages | Single |
| Airflow (CFM) | 1585 |
| Fuel Type | Natural Gas |
| Voltage (V) | 120 |
| Phase | 1 |
| Frequency (Hz) | 60 |
| Minimum Circuit Ampacity (A) | 8.4 |
| Max Fuse / Breaker (A) | 15 |
| Blower Motor | ECM |
| Blower Speeds | 4 |
| Gas Connection | 0.5 |
| Ignition | silicon nitride ignitor |
| Heat Exchanger | Aluminized steel primary, AL 29-4C Stainless steel |
| Vent Connector | 2 inch |
| LP Conversion Kit Included | No |
| Color | Gray |
| Configuration | Downflow |
| Dimensions, W × H × D (in) | 17.50 × 33.00 × 28.50 |
| Net Weight (lb) | 144.00 |
| Shipping Weight (lb) | 144 |
| Certifications | AHRI Certified, CSA Certified |
| Heat Exchanger Warranty | 20 year Heat Exchanger Warranty |
More Documents
Key features
- 66,000 BTU/h input, 95% AFUE
- Voltage: 120V, 1-phase, 60 Hz
- AHRI Certified, CSA Certified
- Manufacturer part number MGD95SE070B4XA
Documents & downloads
Certifications
Warranty
Heat Exchanger Warranty: 20 year Heat Exchanger Warranty Coverage terms, registration and installation requirements are set by MRCOOL; see the MRCOOL warranty document for this model.
Get your unadvertised price
MRCOOL doesn’t allow us to publish our lowest price online. Request an unadvertised deal and we’ll send you the best price we’re allowed to quote, privately and with no obligation.