Available Delivery Options
Fermentasaurus Pressure KitBrand: KegLand (visit brand page)
Earn 44 points on this item.
Optional Pressure Lid
Add the optional pressure lid and turn your Fermentasaurus into a true uni tank. Uni tanks are conical fermenters used both for fermentation and for carbonating and serving finished beer. The assembly includes a lid with two ball lock connect fittings, a relief valve, and a unique floating pick up tube. This pressure lid assembly turns the Fermentasaurus into the most unique fermenter on the market. Here are some possibilities:
Fermenting Under Pressure:
First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commerical beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an Adjustable Relief Valve, or spunding valve, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the Fermentasaurus anytime the unit is under pressure.
Carbonating, Pushing, and Serving:
When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an Adjustable Relief Valve. You can use a Beer Line Assembly to sample at anytime. The idea is that the Fermentasauras can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a Keg Jumper line to connect the Fermentasauras to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a Beer Filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator.
Lack of Oxidation
Because the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock.
The Fermentasauras was developed through a four year process of R&D. It is made from a special grade of PET, has a working pressure of 2.5 bar (35 psi). Additionally every single unit is tested in the factory to 8 bar (112 psi) before being released for sale. The Fermentasaurus needs to be hydro tested, or the PET body replaced, every two years. That test by date is printed on the fermenter. Every unit comes with a set of safety instructions glued to the fermenter. You cannot expose the fermenter to liquids above 120F so for cleaning we recommend Craftmeister Alkaline Brewery Wash which can be used cold. You should also premix your chemicals to the manufacturers suggested dilution before pouring into the fermenter so that you are not pouring concentrated chemicals, such as Star San, directly onto the valve at the bottom.
• Ferment beer under pressure to reduce ester and fusel alcohol production
• Ability to always draw clear beer with the unique, floating draw tube
• Keg already carbonated beer
• Use co2 to push beer into a keg or though a filter into a keg
• Carbonate and serve beer directly from the fermentasaurus, eliminating kegging all together
• Pressure Lid With Safety Release
• Standard Ball-Lock CO? In Connection
• Standard Ball-Lock Beer Out Connection
• Silicone Draw Tube
• Stainless Steel Float