Skip to the content
DigiBoil Electric Kettle | Gen 2 | 35L | 9.25G | 110V | KL07245
DigiBoil Electric Kettle | Gen 2 | 35L | 9.25G | 110V | KL07245
- Liters and Gallon Graduations
- Stainless steel tap with barb and 1/2 thread
- Dual element control (so you can adjust the power from 500watts, 1000watts or 1500watts)
- Compatible with the reflux and pot still that we sell (NOTE: when using our pot or reflux stills do not use more than 1900watts)
- Easy to use
- Great for use as a hot liquor tank, boiler, or hot water urn
- Concealed element for easy cleaning
- Compatible with reflux and pot still. Stainless clamps will secure distillation lid air tight (NOTE: if you are using the reflux or pot still you need to also purchase the distillation lid)
- Can also be used for sous vide cooking
- Temperature range: 32° - 212° F
- KegLand item # KL07245
The Gen 2 DigiBoil features two distinct updates that are not currently pictured in the primary images. The stainless steel lid has been upgraded to a glass lid, allowing you to observe and monitor boil activity. The rubber feet have been replaced with a plastic base that provides improved stability and slightly raises the unit for better ground clearance. Updated images coming soon.
Request a quote
Need a custom build, freight order, or just want pricing in writing before you order? Quotes back within 24 hours.
The DigiBoil is a versatile electric kettle that can be used as a standalone unit or integrated into your current brew system to serve a variety of functions. Easily brew 5-gallon extract batches. Use it to preheat your strike water or sparge water to a precise temperature. Pair it with a pump and heat exchanger to use it for HERMS brewing. Or slap on a still top lid and condenser for distilling! With so many ways to use the DigiBoil, and an affordable price tag to boot, it's hard not to get excited about this electric kettle!
The Gen 2 DigiBoil features an upgraded glass lid, allowing you to monitor your heated or boiling liquid.
Interested in using the DigiBoil for all-grain brewing? With the Mash Upgrade Kit, you can easily convert the DigiBoil into an electric mash tun!
This DigiBoil model has two built-in heating elements that run off a 110V plug. One element is 1000w and the other is 500w for a combined 1500 watts! The elements can be individually controlled, allowing you to use a single element to gently hold temperatures, or engage both elements to quickly go from steeping temp to boiling. Temperatures are set and automatically maintained through the digital control panel. Simply set your desired temperature and flip on the heating element(s).
Integrated stainless ball valve comes with a 13mm barb (approx. 1/2"). The barb can be removed to attach 1/2" FPT fittings if desired.
Features:
- 304 stainless steel construction
- 9 gallon total capacity
- Digital temperature control
- 110V / 15A power and plug (5 ft. cord)
- Dual heating element control (1000w and 500w)
- Heating elements are concealed for easy cleaning
- 304 stainless steel 1/2" ball valve with 13mm barb (approx. 1/2")
- Stamped-in volume markers (gallons & liters)
- Glass lid
- Temperature reads in °F or °C
- With elements turned off, hold both +/- buttons to switch between °F or °C
- Compatible with reflux and pot still (DS130 & DS120)*
- External Dimensions: 29" H x 15" W (including handles)
- Internal Dimensions: 19.5" H x 11.75" W
- ETL Listed
*Distilling: to use the DigiBoil with a distilling condenser, you will need to purchase the still top lid and gasket (DS124).
Warning: Distilling alcohol without permits or licensing is illegal in many countries, including the United States. It is the customer's responsibility to research their local, state, and federal laws and abide by those laws. Brewmaster is not responsible for any damage or injury caused by either misuse or unlawful use. Stills can also be used to produce essential oils, vinegar, purified water and engine fuel (requires permit in USA).
KegLand Part Number: KL07245