Cres Cor Door Latch (CO151F1818B, CO151FPUA12) - 1006

Cres Cor Door Latch (CO151F1818B, CO151FPUA12) - 1006
- Listed fitment: 53 models across 1 brand
- Height (in.): 2
- Length (in.): 12
- Width (in.): 4.55
- Genuine Cres Cor part 1006
All compatible models
53 modelsVerify your unit's model number on the data plate matches one below before ordering.
Request a quote
Need a custom build, freight order, or just want pricing in writing before you order? Quotes back within 24 hours.
Cres Cor 1006 is a Door Latch. Matching the original part number is the surest way to keep the assembly working as designed.
Listed fitment covers 53 models across 1 brand, including Cres Cor CO151F1818B, CO151FPUA12, CO151FPWUA12B. It also cross-references 4 manufacturer part numbers. Check the number on the part you are replacing, or your unit's model number, against the lists below before ordering. The specifications below are the published figures for this exact part number.
Supplied as a single replacement unit.
Magnetic Door Latch Has Offset Composite Handle, No Lock 10-17/32" OD, 4-3/16" Mt. Ctrs. Crescor.
Specifications
| Height (in) | 2 |
| Length (in) | 12 |
| Width (in) | 4.55 |
Listed fitment
- Cres Cor: CO151F1818B, CO151FPUA12, CO151FPWUA12B, CO151FUA12B, CO151FWUA12B, CO151FWUA12B2081, CO151FWUA12B2083, CO151FWUA12B2401, CO151FWUA12B2403, CO151H189B2081Q1, CO151H189B2083Q1, CO151H189B2401Q1, CO151HUA6B2081Q1, CO151HUA6B2083Q1, CO151HUA6B2401Q1, CO151HUA6B2403Q1, CO151HWUA6B, CO151HWUA6B2081, CO151HWUA6B2083, CO151HWUA6B2401, CO151HWUA6B2403, CO151XUA5B2081Q1, CO151XUA5B2083Q1, CO151XUA5B2401Q1, CO151XUA5B2403Q1, CO151XWUA5B, CO151XWUA5B2081, CO151XWUA5B2081Q1, CO151XWUA5B2083, CO151XWUA5B2083Q1, CO151XWUA5B2401, CO151XWUA5B2401Q1, CO151XWUA5B2403, CO151XWUA5B2403Q1, H137S273D1LTB, H137S273D1TB, H137S27D1LTB, H137S27D1TB, HU 18-671-190-MP, HU 18-671-191-MP and 13 more
Cross-reference
- Cres Cor: 1006 120 01 K, 1006-120-01-K, 1006-120-01K, 100612001K
Ordering by part number is the most reliable way to get the right part. If you are matching an existing component, compare the values in the table rather than the description.
