What Size Mini Split Do I Need? A Room-by-Room Sizing Guide

Short answer: measure each room, then pick the indoor unit whose rated room size covers it. MRCOOL's sizing guidance gives a 9,000 BTU unit for rooms up to 400 sq ft, 12,000 BTU up to 550 sq ft, 18,000 BTU up to 800 sq ft, 24,000 BTU up to 1,050 sq ft and 36,000 BTU up to 1,550 sq ft, assuming 8-foot ceilings. Then adjust for sun, ceiling height, people and kitchens, and size a multi-room system one room at a time. If you are heating or cooling a whole house, or you live somewhere with hard winters, get a load calculation before you buy.

Below is the chart, how to use it, the adjustments that change the answer, how multi-zone sizing works, and the questions we get most.

Mini split sizing chart by square feet

These are the largest room sizes MRCOOL gives for each indoor unit size, assuming 8-foot ceilings. MRCOOL lists the same figures in the specifications for its DIY 5th Gen, DIY Select and EasyPro lines, in the sizes each line comes in.

Indoor unit size Room size, MRCOOL guidance
(DIY 5th Gen, DIY Select, EasyPro)
Room size, earlier line
(Advantage 4th Gen)
6,000 BTU Up to 200 sq ft Not listed
9,000 BTU Up to 400 sq ft Up to 375 sq ft
12,000 BTU Up to 550 sq ft Up to 500 sq ft
18,000 BTU Up to 800 sq ft Up to 750 sq ft
24,000 BTU Up to 1,050 sq ft Up to 1,000 sq ft
36,000 BTU Up to 1,550 sq ft Up to 1,500 sq ft

DIY 5th Gen, DIY Select and EasyPro use R-454B refrigerant. Advantage 4th Gen, an earlier R-410A line, lists slightly smaller rooms for the same size. Where MRCOOL lists a room size for a specific model, you will find it in the specifications on that product page.

Shop by size: 9,000 BTU · 12,000 BTU · 18,000 BTU · 24,000 BTU · 36,000 BTU

Step 1: Measure the room

Multiply length by width in feet. A 20 ft × 20 ft room is 400 sq ft; a 12 ft × 14 ft bedroom is 168 sq ft. Convert inches to fractions of a foot first (6 inches is 0.5 ft). For an L-shaped room, split it into rectangles, work out each one and add them together.

Measure the space one indoor unit has to serve. An open kitchen, dining and living area with no doors between them is one space. Two bedrooms are two spaces, even if they are the same size.

Step 2: Pick the size that covers it

Find the smallest size in the chart whose room size is at least your square footage. A 350 sq ft bedroom needs a 9,000 BTU unit. A 500 sq ft living room needs 12,000 BTU. A 600 sq ft great room needs 18,000 BTU.

Step 3: Adjust for the room

Square footage is a starting point. ENERGY STAR's sizing guidance for room air conditioners uses these adjustments for cooling:

  • Very sunny room: increase capacity by 10 percent.
  • Heavily shaded room: reduce capacity by 10 percent.
  • More than two people regularly in the room: add 600 BTU for each additional person.
  • Kitchen: increase capacity by 4,000 BTU.

ENERGY STAR's chart also assumes an 8-foot ceiling, the same as MRCOOL's. A room with a vaulted or 10-foot ceiling has more air to heat and cool than its floor area suggests.

In practice: if a room sits near the top of a size's range and it is very sunny, has a high ceiling, regularly holds a crowd, or is a kitchen, move up one size. A 380 sq ft sunroom is a 12,000 BTU room, not a 9,000.

Step 4: Check heating, not just cooling

Every MRCOOL mini-split in this guide is a heat pump, so it heats as well as cools. Heat pumps lose heating capacity as the outdoor temperature drops, because there is less heat in the outdoor air to move inside. Cold-climate models are built to hold more of their output: data compiled from the NEEP Cold Climate Air-Source Heat Pump List shows it is common for these units to deliver 80 percent or more of their rated capacity (rated at 47°F) when it is 5°F outside.

If your winters are cold, check two numbers on the spec sheet of the model you are considering: its heating capacity at low outdoor temperatures and its minimum operating temperature. In a cold climate, the heating load, not the cooling load, often decides the size. A load calculation gives you both.

Multiple rooms: sizing a multi-zone system

A multi-zone mini-split runs several indoor units from one outdoor unit (the condenser). Each room gets its own indoor unit and its own temperature control. Size it in two steps.

  1. Size every room on its own with the chart and adjustments above.
  2. Pick a condenser that supports that combination. MRCOOL specifies which indoor unit combinations each multi-zone condenser supports. On MRCOOL's combination list, the indoor units connected to a condenser never add up to more than the size in the condenser's name.

For MRCOOL's DIY 5th Gen multi-zone condensers, the combination list works out like this:

Condenser Rooms Indoor units connected (total) Indoor unit sizes used
18,000 BTU 2 to 3 12,000 to 18,000 BTU 6K, 9K, 12K
27,000 BTU 2 to 4 18,000 to 27,000 BTU 6K to 18K
36,000 BTU 2 to 5 24,000 to 36,000 BTU 6K to 24K
48,000 BTU 2 to 6 33,000 to 48,000 BTU 6K to 36K
55,000 BTU 2 to 6 39,000 to 54,000 BTU 6K to 36K

Condenser sizes are the nominal sizes in the model names. MRCOOL rates the larger condensers lower for cooling: 26,000 BTU for the 27K, 34,000 BTU for the 36K, 43,000 BTU for the 48K and 47,000 BTU for the 55K. If all of your rooms will often need full cooling at the same time, compare your total with the condenser's rated cooling capacity, not the number in its name.

Worked example. A 350 sq ft primary bedroom (9,000 BTU), a 300 sq ft office (9,000 BTU) and a 500 sq ft living room (12,000 BTU) add up to 30,000 BTU of indoor units. MRCOOL's list pairs that 9K + 9K + 12K combination with a 36,000 BTU condenser, sold as a wall-mount kit (DIY3-B-36HP090912) or a ceiling cassette kit (DIY3-BC-36HP090912). A 27,000 BTU condenser is too small for it.

Each kit title lists its room sizes, so once you know them you can go straight to the right kit:

2-zone kits · 3-zone kits · 4-zone kits · 5-zone kits · 6-zone kits · single-zone systems

Why bigger is not better

It is tempting to round up "to be safe." An oversized mini-split reaches the set temperature quickly, shuts off, and starts again a few minutes later. That short cycling wastes energy, wears the compressor, and in cooling mode can leave a room cool but clammy, because the system does not run long enough to pull moisture out of the air. A fact sheet from New York's Clean Heat program says the effects on energy use and comfort begin when a heat pump is sized at 120 percent of the building's load, and can become severe above 150 percent.

Undersizing has the opposite problem: the system runs constantly and may not hold temperature on the hottest or coldest days. The goal is a unit sized to the room, with an adjustment only where the room gives you a reason.

When to get a load calculation

The chart is a rule of thumb. It is not a Manual J load calculation, the industry-standard method from ACCA that accounts for insulation, windows, air leakage, orientation and your local design temperatures. MRCOOL itself says a professional load calculation is always recommended for the best results. Get one when:

  • You are heating or cooling a whole house, or replacing a central system.
  • You live in a cold climate and plan to use the mini-split as your main heat.
  • The room has high ceilings, a lot of glass, poor insulation, or is a garage or addition.
  • Your rooms fall between two sizes and the adjustments above do not settle it.

Frequently asked questions

How many square feet will a 12,000 BTU mini split cool?

Up to 550 sq ft, according to MRCOOL's sizing guidance and the specifications for its DIY 5th Gen, DIY Select and EasyPro 12,000 BTU units. The earlier Advantage 4th Gen 12,000 BTU unit is listed for up to 500 sq ft. Both assume 8-foot ceilings. Sunny rooms, high ceilings and kitchens need more capacity.

What size mini split do I need for a 20x20 room?

A 20 by 20 room is 400 sq ft, which is the top of MRCOOL's range for a 9,000 BTU unit. If the room is very sunny, has a high ceiling or regularly holds more than two people, choose 12,000 BTU. MRCOOL's earlier Advantage 4th Gen 9,000 BTU unit is listed for up to 375 sq ft, so with that line choose 12,000 BTU.

What size mini split do I need for 500 square feet?

12,000 BTU. MRCOOL's sizing guidance gives 12,000 BTU for rooms up to 550 sq ft. For 600 sq ft, step up to 18,000 BTU, which MRCOOL gives for rooms up to 800 sq ft.

What size mini split do I need for 1,000 square feet?

For one open 1,000 sq ft space, a 24,000 BTU unit, which MRCOOL's sizing guidance gives for up to 1,050 sq ft. If the 1,000 sq ft is split into several rooms, size each room separately and use a multi-zone system so every room gets its own indoor unit.

Is it better to oversize or undersize a mini split?

Neither. An oversized unit short cycles, which wastes energy and can leave the air humid. An undersized unit runs constantly and may not keep up in extreme weather. Size each room to the chart, then adjust for sun, ceilings, people and kitchens.

Do I need a separate mini split for each room?

Each room you want to control separately needs its own indoor unit, but they can share one outdoor unit. MRCOOL's DIY 5th Gen multi-zone condensers run 2 to 6 indoor units, depending on the condenser size.

Sources

Room sizes come from MRCOOL's sizing guidance and product specifications and assume 8-foot ceilings. They are a rule of thumb, not a Manual J load calculation.