{"product_id":"direct-draw-2-holes-no-towers-3-keg-serv-ware","title":"Serv-Ware 73\" 2-Tap Direct Draw Kegerator, 3-Kegs Commercial Keg Cooler","description":"\u003cp\u003eThe \u003cstrong\u003eServ-Ware DD73-2-HC\u003c\/strong\u003e is a 73\" \u003cstrong\u003edirect draw kegerator\u003c\/strong\u003e — a commercial under-bar keg refrigerator built for bars, restaurants, and taprooms that need clean, short draft lines to a top-mounted tower. It holds up to \u003cstrong\u003e3 half-barrel kegs\u003c\/strong\u003e (or up to 6 sixtels) and ships with \u003cstrong\u003e2 pre-drilled tower holes\u003c\/strong\u003e on the stainless top — you choose the tower, faucet count, and drip tray to match your bar's layout.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWidth:\u003c\/strong\u003e 73\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDepth:\u003c\/strong\u003e 28\"\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 36\" (bar-counter compatible, under-bar ready)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeg capacity:\u003c\/strong\u003e 3 half-barrel kegs or up to 6 sixtels\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTower openings:\u003c\/strong\u003e 2 pre-drilled holes on stainless top\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoors:\u003c\/strong\u003e Self-closing, lockable, field-reversible hinges\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigeration:\u003c\/strong\u003e Forced-air, bottom-mount, self-contained\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature range:\u003c\/strong\u003e 36–40°F (draft-beer optimal)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElectrical:\u003c\/strong\u003e 115V \/ 60Hz \/ 1-phase, NEMA 5-15P plug\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRefrigerant:\u003c\/strong\u003e R-290 (hydrocarbon, EPA-compliant)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExterior:\u003c\/strong\u003e Stainless steel front and top, galvanized sides\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInterior:\u003c\/strong\u003e Epoxy-coated floor, keg rails included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e NSF, UL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShips without:\u003c\/strong\u003e Tower, faucets, couplers, drip tray, CO\u003csub\u003e2\u003c\/sub\u003e regulator (order separately)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy direct draw over a remote system\u003c\/h3\u003e\u003cp\u003eA direct draw setup keeps the beer line short — usually under 5 feet from keg to faucet — which means simpler system balancing, less foaming, no glycol chiller required, and far lower install cost than a long-draw or remote system. For bars pouring under ~10 kegs a week per tap, direct draw is the right architecture. The Serv-Ware 73\" cabinet is sized so a 3-keg lineup fits with room to work the couplers, and the 2-holes top gives you flexibility on tower placement.\u003c\/p\u003e\u003ch3\u003eInstall notes for techs\u003c\/h3\u003e\u003cp\u003eStandard North American Sankey (D-system) couplers fit domestic half-barrels and sixtels. Tower shanks typically use 3\" or 3-1\/8\" hole spacing — confirm against your tower's base plate before ordering. Air-cooled direct-draw towers are recommended for runs under 18\" to the faucet; for taller or insulated towers, plan on a tower cooling fan to prevent first-pour foam. CO\u003csub\u003e2\u003c\/sub\u003e regulator pressure is usually set at 10–14 PSI depending on beer style and line length. Bottom-mount compressor, front-breathing — flush install OK on sides and rear.\u003c\/p\u003e\u003cp\u003eCovered by a \u003cstrong\u003e2-year parts and labor warranty plus a 5-year compressor warranty\u003c\/strong\u003e. Ships freight from our warehouse — order by 2 PM CT for same-day handling.\u003c\/p\u003e","brand":"Serv-Ware","offers":[{"title":"Default Title","offer_id":51586052325592,"sku":"SERV-DD73-2-HC","price":4234.63,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0627\/8725\/6536\/files\/DD73-2-HC_DIRECT_DRAW_-_2-HOLES_NO-TOWERS__4_KEG__SERV-WARE_1.jpg?v=1776799974","url":"https:\/\/www.howdybrewer.com\/products\/direct-draw-2-holes-no-towers-3-keg-serv-ware","provider":"HowdyBrewer","version":"1.0","type":"link"}